China's Linglong One global first-of-a-kind unit hot test steadily advances, moving toward the goal of fuel loading within the year

Recently, the Linglong One global first-of-a-kind unit at Changjiang, Hainan, China, is currently advancing hot functional testing in an orderly manner, steadily moving toward the goal of fuel loading within the year. It is understood that modular small reactors feature flexible deployment and outstanding inherent safety, and can be adapted to diverse application scenarios such as island power supply and industrial steam supply. Linglong One is the world's first onshore commercial modular small nuclear reactor to pass the safety review of the International Atomic Energy Agency (IAEA). At present, all civil construction of the project has been completed, and the installation of core equipment is basically complete. The hot functional test currently being carried out is a key comprehensive commissioning stage before unit fuel loading, used to verify the performance of the reactor primary loop and supporting systems under high-temperature conditions. If fuel loading is achieved within the year, it will mark the transition of the world's first onshore commercial modular small reactor from the construction stage to the operation preparation stage.

2026-10-05

Cumulative safe power generation of China's Sanmen Nuclear Power Phase I exceeds 150 billion kWh

According to reports, as of 00:00 on October 5, 2026, the cumulative safe power generation of Units 1 and 2 of China's Sanmen Nuclear Power Phase I exceeded 150 billion kWh. It is reported that Sanmen Nuclear Power Phase I is among the world's first AP1000 third-generation nuclear power units to be completed and put into operation, and Unit 1 officially entered commercial operation in 2018. As one of the world's first AP1000 third-generation nuclear power projects, Sanmen Nuclear Power Phase I has exemplary significance in technical verification and the accumulation of operating experience. The AP1000 adopts a passive safety system and is designed to maintain a safe state for an extended period after an accident without relying on external power sources or manual intervention. In terms of environmental benefits, since being put into operation, Sanmen Nuclear Power Phase I has cumulatively saved more than 42 million tons of standard coal and reduced carbon dioxide emissions by more than 110 million tons. This clean electricity is continuously transmitted to East China and the Yangtze River Delta region, helping to promote the low-carbon transformation of the energy structure while ensuring a stable regional power supply. Compared with thermal power of the same scale, nuclear power does not produce atmospheric pollutants such as sulfur dioxide, nitrogen oxides, and soot, and has a long-term effect on improving regional air quality. According to the planning of the Sanmen Nuclear Power Base, construction of the remaining units will also be advanced. After all units at the base are completed, annual power generation can reach 60 billion kWh, which will further enhance the zero-carbon electricity supply capacity of East China and accumulate experience for the large-scale and standardized construction of China's coastal nuclear power bases.

2026-10-05

Fangchenggang Nuclear Power Phase I Marks 10th Anniversary of Commercial Operation: Two Units Have Cumulatively Supplied Over 160 Billion kWh, with WANO Indicators Achieving Full Marks for Seven Consecutive Years

Recently, Phase I of the Fangchenggang Nuclear Power Plant under China General Nuclear Power Group officially ushered in the 10th anniversary of its commercial operation. As the first nuclear power project in western China and in an ethnic minority region, the two million-kilowatt-class pressurized water reactor units at the site have maintained safe and stable operation for ten years since being put into operation. Their WANO composite index has achieved full marks for seven consecutive years, and they have cumulatively delivered over 160 billion kWh of clean electricity to the Beibu Gulf Economic Zone. It is understood that Phase I of the Fangchenggang Nuclear Power Project is located on Qisha Peninsula in Fangchenggang City, Guangxi Zhuang Autonomous Region, and is an important energy backbone project of the national Western Development Strategy. The project planned to build two self-developed CPR1000 pressurized water reactor nuclear power units with a single-unit capacity of 1.08 million kilowatts...

2026-10-04

First Backup Emergency Diesel Generator of Hualong One Officially Available at Sanao Nuclear Power Unit 2

On October 2, the first backup emergency diesel generator (9LHW) of Hualong One completed the replacement grid connection test at Sanao Nuclear Power Unit 2 and was officially put into service. The equipment can replace any one of the original 12 emergency diesel generators (EDGs) in Phase I and Phase II projects, significantly improving the redundancy, reliability, and maintenance flexibility of the plant's emergency power supply. Sanao Nuclear Power Phase I and Phase II each have 3 emergency busbars, with one EDG configured for each busbar. However, due to the absence of cross-power supply for loads, the preventive maintenance windows of the original units were concentrated, affecting the overhaul schedule. Since 2021, Cangnan Nuclear Power has promoted the project of adding backup diesel generators, improving from the design source, building a new backup emergency diesel generator building (BDD), and constructing corridors and cables connected to each unit...

2026-10-03

CNNC Huaxing's Self-Developed "Island-Building Machine" Completes First Jacking at Xuwei Project

Recently, the containment construction integrated platform (referred to as the "Island-Building Machine") for Unit 1 of the Jiangsu Xuwei Nuclear Heating and Power Plant, constructed and independently developed by CNNC Huaxing, successfully completed its first jacking, officially transitioning from installation and commissioning to the autonomous climbing phase. The platform integrates self-climbing, enclosed operations, and intelligent monitoring, and innovatively adopts a lightweight modular design. It incorporates equipment such as the platform system, wall-attached supports, hydraulic climbing, safety monitoring, and folding-boom cranes, effectively reducing R&D costs and improving assembly and disassembly efficiency. The Island-Building Machine has three core functions: first, the hydraulic system drives synchronous jacking of machine positions, eliminating dependence on tower cranes for repeated lifting of formwork hanging frames; second, the top platform also serves as a material yard, with folding-boom cranes...

2026-10-03

Poskom Angular Pinch Magnet Pulsed Power Supply Delivered, X-ray High-Voltage Power Supply Manufacturer Officially Enters Fusion Equipment Sector

Recently, the angular pinch magnet pulsed power supply (TP power supply) independently developed by Poskom has completed delivery, marking that this X-ray high-voltage power supply manufacturer has officially entered the controlled nuclear fusion track. This power supply primarily serves experiments including angular pinch, field-reversed configuration (FRC), magnetized plasma generation, and magnetic confinement compression. It is key specialized power equipment for magnetic confinement controlled nuclear fusion and high-energy-density physics research, featuring hardcore capabilities such as nanosecond-level multi-stage multi-channel pulse timing coordination, waveform fidelity under ultra-high current and strong electromagnetic interference, and precise regulation of mutual inductance coupling multi-waveform attenuation, capable of matching the demanding operating conditions of frontier fusion experiments. Poskom was founded in 2015, focusing on specialized high-voltage power supplies, pulsed...

2026-10-03

Department of Nuclear Medicine at Peking University First Hospital Receives EARL Theranostics Advanced-L2 Certification, Bringing Theranostics in Line with International Standards

The Department of Nuclear Medicine at Peking University First Hospital has recently officially received the Theranostics Advanced-L2 certification issued by EARL (EANM Research Ltd.), an affiliate of the European Association of Nuclear Medicine, becoming one of the few nuclear medicine theranostics centers in China to obtain this high-level certification. The certification audit standards are rigorous, covering comprehensive dimensions including PET/CT quantitative accuracy, therapy center operations, patient safety management, and clinical competency. Passing the certification means that the department's quantitative imaging and targeted therapy data meet internationally mutually recognized standards and can achieve high-level alignment with advanced nuclear medicine centers in Europe and the United States. During the certification review, EANM President-Elect Professor Felix M. Mottaghy and Ms. Iva...

2026-10-03

CGN Cangnan No. 3 Nuclear Power Co., Ltd. Established

According to Qichacha APP, CGN Cangnan No. 3 Nuclear Power Co., Ltd. was recently established, with its business scope including: heat production and supply; technology import and export; goods import and export, etc. Qichacha equity penetration shows that the company is jointly held by China General Nuclear Power Corporation, Zhejiang Zheneng Electric Power Co., Ltd., and Zhejiang Geely Industrial Investment Holding Co., Ltd., a wholly-owned subsidiary of Zhejiang Geely Holding Group Co., Ltd., among others.

2026-10-03

Inner Dome Concrete Pouring of Zhangzhou Nuclear Power Unit 3 Completed

On September 30, as the last batch of concrete was successfully poured into the formwork, China Nuclear Industry 24 Construction Co., Ltd. successfully completed the concrete pouring of the inner dome of the reactor building of the Hualong One Zhangzhou Nuclear Power Unit 3. The achievement of this key milestone marks the full completion of the civil construction of the inner containment for this unit, laying a solid foundation for the subsequent prestressing construction of the containment and the installation of core nuclear equipment. As an important safety barrier of the Hualong One independent third-generation nuclear power technology, the inner dome is located at the top of the nuclear island, and its core function is to ensure the integrity and absolute leak-tightness of the reactor building and prevent the leakage of radioactive substances. Faced with nuclear construction technical challenges such as the complex curved surface structure of the dome and the high difficulty of high-altitude operations, the Zhangzhou Nuclear Power Project Department...

2026-10-02

CGN Environmental Protection and Cangnan Nuclear Power Sign a New Round of General Contracting Agreement for Nuclear Environmental Protection Business

Recently, CGN Environmental Protection and Cangnan Nuclear Power officially signed a new round of general contracting agreement for nuclear environmental protection business. This marks a comprehensive upgrade of their cooperation from version 1.0 to version 2.0, and also a substantive implementation of the Group's deepening reform strategy in the field of nuclear environmental protection. Zhan Weihua, Deputy Party Secretary and General Manager of Cangnan Nuclear Power, and Qin Geng, Party Committee Member and Chief Accountant; Ren Junhua, Deputy Party Secretary and General Manager of CGN Environmental Protection, Lu Shubao, Party Committee Member and Deputy General Manager, and Yang Wei, Party Committee Member and Deputy General Manager attended the signing ceremony. In 2025, CGN Environmental Protection transitioned toward nuclear environmental protection business and signed the first round of general contracting agreements with multiple plants. Over the past year, the company has continuously honed its capabilities in business undertaking and execution, and is accelerating the construction of an integrated...

2026-10-02

All Main Coolant Piping Modules of Unit 1 at China's Guangdong Taipingling Nuclear Power Project in Place

　　According to reports, on September 29, all main coolant piping modules of the nuclear island of Unit 1 at China's Guangdong Taipingling Nuclear Power Project were hoisted and installed in place. The main coolant piping is known as the "main artery" of the reactor, used to connect the reactor pressure vessel, steam generators and reactor coolant pumps, providing a circulation channel for the primary coolant, and is classified as nuclear safety Class 1 and seismic Category I equipment. The main coolant system of the Hualong One reactor consists of three loops, connecting the three major main equipment into a closed loop through the main coolant piping, and is an important part of the primary pressure boundary.　　The completion of all installations in place means that the installation of the core major components of the nuclear island is basically completed. The hoisting and installation of the main coolant piping requires precise control of pipe section angles and center-of-gravity positions within a confined space...

2026-10-01

China's "Artificial Sun" BEST Campus Delivered and Commissioned, Controlled Nuclear Fusion Accelerates Toward Engineering Demonstration

On October 1, the campus of the national major project Compact Fusion Energy Experimental Device (Burning plasma Experimental Superconducting Tokamak, BEST) was officially delivered and commissioned, and the main machine simultaneously entered the core assembly stage of the "four-ring set." The device is located in Hefei, Anhui, led in design by the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), and constructed by Fusion New Energy (Anhui) Co., Ltd. It is China's independently developed new-generation fusion burning experimental device. BEST aims to simulate solar nuclear fusion and fill the gap between experimental reactors and demonstration reactors...

2026-10-01

Strengthen Regulation of Fusion Devices, Empower the Development of New Technologies

Recently, the South China Regional Office of Nuclear and Radiation Safety Supervision of the Ministry of Ecology and Environment (hereinafter referred to as the South China Regional Office) conducted a radiation safety supervision inspection of the J-TEXT tokamak fusion experimental device at Huazhong University of Science and Technology. As the only medium-to-large tokamak experimental device at a university in China, J-TEXT bears the important mission of fusion talent cultivation and frontier physics experiments. The South China Regional Office focused on key aspects including equipment operation, radiation protection, and authorization management, meticulously investigated safety hazards, verified the implementation of safety management systems, and urged Huazhong University of Science and Technology to promptly plug safety loopholes and standardize device operation procedures, effectively building a strong defense line for the safe and stable operation of fusion experimental devices, providing solid support for the orderly conduct of scientific research experiments...

2026-10-01

The First Inspection Team of the Party Leadership Group of CNNC Feedback Inspection Situation to the Party Committee of China Baoyuan

On September 29, the First Inspection Team of the Party Leadership Group of CNNC fed back the inspection situation to the Party Committee of China Baoyuan. Wang Xuejun, member of the Party Leadership Group and Chief Accountant of CNNC, attended the meeting and delivered a speech. Li Kaiming, head of the First Inspection Team of the Party Leadership Group of CNNC, fed back inspection opinions. Lin Xuyang, Secretary of the Party Committee and Chairman of China Baoyuan, presided over the meeting and made a statement. Wang Xuejun emphasized that China Baoyuan should thoroughly study and implement General Secretary Xi Jinping's important expositions on inspection work, uphold the consciousness of turning the blade inward, shoulder the responsibility of confronting problems head-on, and strictly and practically advance all tasks of inspection rectification. Taking inspection rectification as a new starting point, create a new atmosphere of loyalty, cleanliness, and responsibility, achieve new accomplishments in high-quality development, and with tangible rectification results and hard work achievements of responsibility and progress, strive to write a new chapter in the high-quality development of the group company.

2026-10-01

The 4th refueling overhaul of Tianwan Nuclear Power Unit 6 officially begins

At 06:00 on October 1, the main control operator of Tianwan Nuclear Power Unit 6 completed the turbine-generator trip operation, and the unit was officially disconnected from the East China Power Grid, marking the official start of the Tianwan Nuclear Power OT604 overhaul (the 4th refueling overhaul of Unit 6). During the preparation period for the OT604 overhaul, Jiangsu Nuclear Power and China Nuclear Operation and Maintenance deepened joint Party building study and practice, solidly advanced various overhaul preparation tasks, strictly implemented the "721" working principle of "seven parts preparation, two parts execution, one part feedback," conducted discussions and simulations on key milestones in advance, identified and investigated difficulties and bottlenecks in the overhaul, and formulated detailed countermeasures. This overhaul is a Class C overhaul and is also the final battle of the annual overhaul tasks at the Tianwan Nuclear Power Base. Jiangsu Nuclear Power...

2026-10-01

The first concrete pouring for the nuclear island of Unit 2 of State Power Investment Corporation (SPIC) Guangxi Bailong Nuclear Power Project was successfully completed.

The first concrete pouring for the nuclear island of Unit 2 of SPIC Guangxi Bailong Nuclear Power Project was completed at 16:07 on September 30, after 69 hours and 40 minutes of continuous work. A total of 6,732.5 cubic meters of concrete was used for this pouring, marking another important milestone for the project after the FCD achievement for the nuclear island of Unit 1. Phase I of the Bailong Nuclear Power Project plans to build two CAP1000 nuclear power units. These two units adopt independently designed and domestically manufactured Generation III passive nuclear power technology, with each unit having a capacity of up to 1.25 million kilowatts. At present, Unit 1 has entered the construction and installation stage, and the steel containment vessel bottom head, CA20, CV1R, CA01...

2026-09-30

Pressurizer of Lufeng Nuclear Power Unit 1 Successfully Hoisted into Place

On September 30, the pressurizer of Lufeng Nuclear Power Unit 1, constructed by China Nuclear Industry 23 Construction Co., Ltd., was successfully hoisted into place. The success of this hoisting marks major progress in the installation of the primary circuit main equipment in the nuclear island of Lufeng Nuclear Power Unit 1, laying a solid foundation for the subsequent surge line welding, system equipment installation, and commissioning work. The pressurizer is a core main equipment of the nuclear island reactor coolant system and a Class 1 nuclear safety equipment. It undertakes the tasks of pressure regulation and overpressure protection for the primary circuit system and is key equipment for ensuring the safe and stable operation of the reactor. This equipment is a vertical cylindrical pressure vessel with a body height of more than ten meters and a total hoisting weight of over one hundred tons. It is installed in the pressurizer compartment of the CA01 module, with stringent design and manufacturing standards...

2026-09-30

Main Coolant Piping Welding of Lufeng Nuclear Power Unit 6 Successfully Completed

On September 28, the main coolant piping welding of the nuclear island of Lufeng Nuclear Power Unit 6 was successfully completed. All non-destructive testing of the main coolant piping was finished, with the first-pass qualification rate of radiographic testing (RT)/ultrasonic testing (UT) reaching 100%, laying a solid foundation for subsequent key milestones such as nuclear loop flushing and cold functional testing. Facing the high standards of main coolant piping welding, the project department strictly implemented nuclear safety supervision and control requirements, carried out precondition verification across all dimensions of personnel, machines, materials, methods, and environment, established a main coolant piping welding control zone, strictly controlled the working environment including temperature, humidity, and cleanliness, and ensured stable and controllable welding conditions. The project team fully drew on the main coolant piping welding experience of Unit 5, formulated a special plan and implemented full-process management, and through digital monitoring means throughout the entire welding process, tracked key parameters such as welding deformation and temperature in real time, refined the process disclosure, in-process inspection, and quality acceptance procedures for each weld joint, and applied the work style of "strict, cautious, meticulous, and pragmatic" to every welding operation and every weld seam, ensuring the successful completion of the main coolant piping welding of Unit 6.

2026-09-30

The Fifth China-France Energy Dialogue Held in Beijing

On September 29, He Yang, Deputy Administrator of China National Energy Administration, and Cedric Brier, Director General of the Directorate General for Energy and Climate of France, co-chaired the Fifth China-France Energy Dialogue in Beijing. The two sides conducted in-depth exchanges on policies concerning energy transition, energy security, and electrification, and fully exchanged views on practical cooperation in renewable energy, energy storage and hydrogen energy, civil nuclear energy, and other fields. Both sides emphasized that China-France energy cooperation started from civil nuclear energy and gradually expanded to multiple fields including oil and gas, renewable energy, energy technology innovation, and green and low-carbon transition, forming a cooperation pattern featuring complementary advantages, mutual benefit and win-win results, and long-term stability. Both sides are willing to uphold high-level consensus, leverage their respective advantages, tap into cooperation potential, innovate cooperation models, and push China-France energy cooperation to continue to deepen and upgrade, injecting new momentum into the sustained and healthy development of the China-France comprehensive strategic partnership, and contributing China-France wisdom and strength to promoting global energy security and green development.

2026-09-30

MOST Sets the Pathway for Hard-Core Science and Technology Breakthroughs in the "15th Five-Year Plan": Comprehensive and Systematic Deployment of Major Basic Research on Controlled Nuclear Fusion to Solidify the Foundation of Future Strategic Energy

At the series-themed press conference on "Getting Off to a Good Start in the '15th Five-Year Plan'" held by the State Council Information Office, the Ministry of Science and Technology officially released the top-level design and core breakthrough roadmap for building a science and technology powerhouse over the next five years. When outlining the layout for major science and technology breakthroughs and original innovation, Minister of Science and Technology Yin Hejun explicitly emphasized that, in strengthening the strategic depth of basic research, China will closely anchor itself to the frontiers of the global energy revolution and, centering on underlying scientific bottlenecks in key fields such as energy and materials, comprehensively and systematically deploy major basic research tasks including controlled nuclear fusion (Controlled Nuclear Fusion), so as to seize the future...

2026-09-30

China Institute of Atomic Energy Holds Advanced Scientific and Technological Achievements Transformation Conference: Releases Small Reactor 9-Type Product Matrix, Signs Agreements on Curie-Level Terbium-161 Preparation and SMR Overall Scheme Design

On September 29, the China Institute of Atomic Energy (abbreviated as CIAE) held in Beijing an Advanced Scientific and Technological Achievements Transformation Conference themed "Innovation · Nuclear Fusion of New Quality." The conference showcased CIAE's practical breakthroughs in deepening scientific and technological system reform, advancing the pilot program for empowering scientific and technological achievements from job-related inventions, and integrated institute-enterprise operations, and officially released multiple major scientific research achievements covering advanced reactors, nuclear medical equipment, and isotope preparation, vigorously promoting the acceleration of nuclear technology from the laboratory to the production line. In the report on reform experience and benchmark incubation platforms, the conference systematically summarized three landmark reform achievements: SASAC Pilot Reform for Empowering Scientific and Technological Achievements from Job-Related Inventions: CIAE used...

2026-09-30