Module 4 of Steel Liner for Unit 3 of San'ao Nuclear Power Plant Successfully Hoisted

At 8:16 a.m. on August 15, the hoisting operation of Module 4 of the 3BRX steel liner for Unit 3 of the San'ao Nuclear Power Plant was officially launched. Under the stable operation of the 2,000-ton crawler crane of CNNC Machinery Engineering, the module successively completed a series of procedures including slewing, load-bearing travel, and alignment adjustment. After 220 minutes, the hoisting task was successfully completed. Module 4 of Unit 3 hoisted this time was integrally assembled from the fourth and fifth layers of the cylinder, with a diameter of approximately 45 meters and a height of 11.46 meters. The module features a large volume, susceptibility to deformation, and limited slewing space for the crane. The project team strictly implemented the special plan, completed site reinforcement, transport of baskets and counterweights, and crawler crane relocation in advance, organized hoisting simulation drills, and comprehensively inspected various safety hazards...

2026-08-18

Concrete pouring completed for turbine deck of conventional island of Unit 2 at CGN Lufeng Nuclear Power Plant

At 12:30 on August 11, 2026, concrete pouring officially commenced for the turbine deck of the conventional island of Unit 2 at CGN Lufeng Nuclear Power Plant, and was successfully completed at 16:00 on August 13, after 51.5 hours, with a total of 2,685m³ of concrete poured. The turbine deck structure of the conventional island of Unit 2 measures 68.7m in length and 16m in width, with a top elevation of +8.43m, consisting of two longitudinal beams and six transverse beams. Owner-supplied items include 296 anchor bolts, 56 lifting columns, 28 anchor plates, and 18 oil pipe sleeves, among which 8 sets of large embedded parts weigh over 10t each. The turbine deck construction features complex structures, a large number of owner-supplied embedded parts, and high precision requirements. During the turbine deck construction, the project team fully drew on the experience feedback from the conventional island turbine deck of Unit 1...

2026-08-18

SPIC Shandong Nuclear Power's Total Intellectual Property Achievements Surpass 1,000

Recently, the total intellectual property achievements of SPIC Group Shandong Nuclear Power surpassed 1,000, and the company was also recognized as a "Yantai Intellectual Property Advantage Enterprise." It is reported that these 1,000 achievements include over 800 patents (including 5 international patents), 194 software copyrights and work copyrights, and 3 registered trademarks. Focusing on the new scenario of nuclear energy heating, Shandong Nuclear Power has formed over 100 patent achievements covering key areas such as system design, equipment optimization, and operation control, promoting clean nuclear energy's transition from power generation to heating, and creating China's first nuclear energy comprehensive utilization brand, "Nuanhe No.1." Focusing on the technical breakthrough of reheat control valves in the conventional island under the large-scale heating scenario of AP/CAP1000 pressurized water reactor nuclear power plants, the company has overcome key technical challenges and formed a series of patent achievements, supporting the innovative development of nuclear power equipment. The main pump frequency converter is known as the "heart" of nuclear power operation. Around its technical breakthroughs, the company has established a patent portfolio, driving control optimization and equipment reliability improvement, providing strong support for innovation in nuclear power equipment.

2026-08-17

Minister of Ecology and Environment Huang Runqiu Visits Zhejiang to Survey Ecological Environmental Protection and Nuclear Power Safety Regulation

From August 14 to 15, Minister of Ecology and Environment Huang Runqiu visited Lishui, Taizhou, and Ningbo in Zhejiang Province to survey ecological environmental protection efforts. During his tenure in Zhejiang, General Secretary Xi Jinping visited Lishui multiple times and expressed high expectations for strengthening ecological environmental protection. Huang Runqiu visited Liandu District in Lishui to inspect on-site the outcomes of Oujiang River ecological environment governance, rural living environment improvement, and ecological protection efforts, and also toured the Ecological Product Value Realization Mechanism (Lishui) Exhibition Hall to gain in-depth understanding of local practical experience in advancing ecological product value accounting and exploring the "Two Mountains" transformation pathway. He stated that it is essential to thoroughly study and implement Xi Jinping Thought on Ecological Civilization, firmly establish and practice the concept that lucid waters and lush mountains are invaluable assets, adhere to ecological priority and green development, and effectively protect this beautiful landscape. It is necessary to fully leverage the role of demonstration models, deepen the application of the "Thousand Villages Demonstration, Ten Thousand Villages Improvement" experience, continuously improve the rural living environment, develop distinctive industries such as "ecology + cultural tourism" tailored to local conditions, and support rural ecological revitalization. It is also important to summarize and promote the "Two Mountains" transformation model, actively expand channels for realizing ecological product value, and continuously convert ecological advantages into development advantages. Actively, safely, and in an orderly manner developing nuclear power is an important measure for building a clean, low-carbon, safe, and efficient energy system and for achieving carbon peak and carbon neutrality. Huang Runqiu visited the Sanmen Nuclear Power Plant in Taizhou, going deep into the main control room of the operating unit and the nuclear island building of the unit under construction to learn in detail about the operation status and construction progress of the nuclear power units, and to express condolences to and meet with the on-site supervision personnel of the East China Regional Office of Nuclear and Radiation Safety Supervision. He emphasized the need to uphold the rational, coordinated, and balanced nuclear safety philosophy, place the assurance of nuclear safety at the highest priority, strengthen whole-process supervision of nuclear power plants, and consolidate the primary responsibility for nuclear safety. It is necessary to urge enterprises to strictly implement the requirements of nuclear safety regulations and standards, effectively ensure the safe operation of nuclear power units and controlled construction quality, enhance equipment stability and reliability, strengthen radiation environment monitoring at nuclear power plants, and safeguard the high-quality development of the nuclear power industry with high-level safety. Ensuring the construction quality of nuclear power units is crucial to improving the safety level of nuclear power plants. Huang Runqiu visited the nuclear island foundation area of the Jinqimen Nuclear Power Plant in Ningbo to survey the construction progress and engaged in on-site exchanges with nuclear safety supervision personnel. He emphasized the need to implement the spirit of General Secretary Xi Jinping's important speeches and instructions on nuclear safety work, always adhere to the principles of safety first and quality first, effectively operate the nuclear safety responsibility system and quality management system, and continuously strengthen experience feedback and safety improvements. It is necessary to continuously advance the development of nuclear safety culture, strengthen bottom-line thinking and extreme-scenario thinking, enhance natural disaster monitoring, early warning, and preventive response, and effectively build premium and safe projects to strongly support the sustainable development of China's nuclear power industry and its "going global" strategy. Relevant officials from Zhejiang Province participated in the survey. Principal officials from relevant departments and bureaus of the Ministry of Ecology and Environment participated in the survey. Officials from the Department of Ecology and Environment of Zhejiang Province and others participated in the survey.

2026-08-17

Steel Containment Vessel Ring 1 of Unit 1 at Guangxi Bailong Nuclear Power Plant Successfully Hoisted into Place

At 11:38 on August 16, after 4 hours and 01 minutes of continuous and stable operation, the steel containment vessel ring 1 (CV1R) of the nuclear island of Unit 1 at Guangxi Bailong Nuclear Power Plant was successfully hoisted into place. This hoisting marks another successful installation of a key module following the CVBH and CA20 modules for Unit 1 of Bailong Nuclear Power Plant, signifying a critical breakthrough in the construction of the main structure of the nuclear island of Unit 1. The steel containment vessel consists of five major modules: the bottom head, the intermediate cylindrical shell (rings 1 to 3), and the top head, serving as the third physical safety barrier of the reactor. The CV1R hoisted this time is the core component with the largest volume and heaviest weight among the five major components of the steel containment vessel, measuring approximately 15.5 meters in height and up to 39.6 meters in maximum inner diameter, integrating equipment...

2026-08-17

Successful Hoisting of Module 3 of the Passive Containment Cooling Water Tank for Unit 4 of Zhangzhou Nuclear Power Plant

On August 15, the hoisting of Module 3 of the passive containment cooling water tank in the reactor building of the nuclear island of Unit 4 at Zhangzhou Nuclear Power Plant was successfully completed, with the entire hoisting process being safe and quality-controlled. The passive containment cooling water tank is an important component of the passive part of the containment cooling water injection system. With a total height of 22.02 meters, it features a non-uniform cross-section in an approximately fan-shaped structure and is planned as three integral modules. Module 3, hoisted this time, had a total lifting weight of approximately 132.8 tons and a height of 5.84 meters, and was positioned using a 2000-ton-class crawler crane. As the crane slowly lifted the module, through a series of precise operations including hook lifting, boom slewing, crane traveling, and luffing, Module 3 was smoothly placed onto Module 2 of the passive containment cooling water tank, with the entire process proceeding seamlessly...

2026-08-17

Controlled Nuclear Fusion Specialized Power Supply Industry Matchmaking Conference Held in Hefei High-tech Zone

On August 14, a major industry event focused on the fusion core equipment track — the "Fusion Power Source, Chain Linkage, New Journey" Controlled Nuclear Fusion Specialized Power Supply Industry Matchmaking Conference — was held at the Zhongke Hefei Technology Innovation Engineering Institute. The conference was guided by the Hefei High-tech Zone Science and Technology Bureau, co-hosted by the USTC Silicon Valley Service Platform and the Fusion Financial Institutions Alliance, organized by Hefei Tai'a Fusion Technology Co., Ltd., Science Island Hefei Technology Innovation Engineering Institute Co., Ltd., and the Anhui Science, Technology and Industry Integration Innovation Association, with exclusive support from the Bank of China Hefei Branch. Specialized power supplies are the core power hub supporting the stable operation of controlled fusion devices, and are also key hardware for achieving stable plasma confinement and advancing self-sustaining fusion reactions. In various fusion experimental devices, the overall cost of the power supply system accounts for a considerable proportion. Currently, the global controlled nuclear fusion industry has entered a stage where engineering demonstration and commercialization breakthroughs proceed in parallel, and the industry is facing a window of opportunity for development. However, the industry still faces practical development challenges such as long cycles for translating scientific research into technology applications, lack of information exchange between upstream and downstream supply and demand, and heavy R&D burdens on sci-tech innovation and manufacturing enterprises.

2026-08-17

Survey of Japanese 18-year-olds: Nearly 60% support restarting or replacing nuclear reactors that meet safety standards

A survey of young people around age 18 in Japan shows that nearly 60% of respondents support restarting nuclear power plants that meet safety standards or replacing existing reactors with new units; meanwhile, over 70% of respondents have expectations or some expectations for advanced innovative reactors. The 18-year-old awareness survey conducted by the Nippon Foundation asked respondents to choose which of two statements was closer to their own view: one being that nuclear power plants meeting safety standards should be restarted or replaced with new units; the other being that nuclear power should not be relied upon due to accident risks and radioactive waste issues. The results showed that 28.5% of respondents said their view was "close" to the first statement, and 29.8...

2026-08-16

The Ecological Environment Code of the People's Republic of China Officially Takes Effect Today

On August 15, 2026, coinciding with the fourth National Ecology Day, the Ecological Environment Code of the People's Republic of China officially took effect. The promulgation and implementation of this Code marks the formal entry of China's ecological environment protection legal system into a new stage of codification, representing a major milestone in the rule of law for advancing ecological civilization construction and the building of a Beautiful China. The Code's promulgation: A historic leap in the rule of law for ecological civilization construction. The Ecological Environment Code of the People's Republic of China is the second foundational law named as a "Code" after the Civil Code. The Code systematically integrates existing effective laws and regulations in areas including environmental protection, air pollution prevention and control, water pollution prevention and control, soil pollution prevention and control, solid waste pollution prevention and control, radioactive pollution prevention and control, and noise pollution prevention and control. It abolishes 10 separate laws, incorporates the essential provisions of more than 20 laws into the Code system, and makes comprehensive provisions on basic principles of ecological environment protection, supervision and management systems, pollution prevention and control, ecological protection and restoration, green and low-carbon development, and climate change response, establishing a complete and logically rigorous legal norm system. The Code also makes comprehensive provisions on radioactive pollution prevention and control...

2026-08-15

Faculty and Students from King Abdulaziz University Visit CNECC Langfang Base

On August 12, 2026, a delegation of faculty and students from King Abdulaziz University in Saudi Arabia visited the CNECC Langfang R&D Base for an on-site tour and academic exchange. Yuan Yidan, Chief Expert of the company, received the visiting delegation. This event promoted talent exchange between China and Saudi Arabia in the nuclear energy sector, further deepened mutual connectivity in areas such as nuclear energy technology R&D, talent cultivation, and scientific research innovation, and contributed to win-win international cooperation in nuclear energy. During the exchange, technical experts at the base warmly received the Saudi delegation and provided detailed introductions to CNECC's achievements and core strengths in nuclear power engineering design, advanced nuclear energy technology R&D, nuclear safety system development, and the implementation of overseas nuclear power projects...

2026-08-15

Chinese Team Achieves Full Technical Chain Integration in Wall Treatment for the World's Largest "Artificial Sun"

Recently, the team from the Southwestern Institute of Physics under the China National Nuclear Corporation (CNNC) has made significant progress in the wall treatment technology of the International Thermonuclear Experimental Reactor (ITER): not only successfully passing the Delta Final Design Review (Delta FDR) for the supplementary design of the Glow Discharge Cleaning (GDC) system permanent electrode project, but also, leading and jointly with CNI23, winning the bid and signing contracts in France for the design and manufacture of the boronization system and the X-ray Crystal Spectrometer (XRCS) gas supply system. This marks a new expansion of the Chinese team's core technology in ITER wall treatment, extending the scope from the original glow discharge cleaning to boronization wall treatment, achieving a full technical chain from impurity removal to surface pre-treatment...

2026-08-15

SPIC Haiyang Nuclear Power Unit 3 Hot Functional Test Successfully Completed

At 17:30 on August 13, the hot functional test (HFT) of Unit 3 at SPIC Shandong Nuclear Power Haiyang Nuclear Power Plant was successfully completed, laying a solid foundation for subsequent fuel loading and first grid connection of the unit. ▲Aerial view of Shandong Nuclear Power Haiyang Nuclear Power Plant. The hot functional test is the most critical non-nuclear comprehensive verification phase before nuclear fuel loading, often referred to as the "final exam" or "mock exam" before a nuclear power plant officially generates electricity. By executing a series of tests simulating actual operating conditions within the pressure and temperature ranges of normal reactor operation, it comprehensively verifies the reliability of nuclear island and conventional island systems and equipment under hot operating conditions, ensuring that relevant parameters meet design requirements. ▲On July 4, during the normal residual heat removal system (RNS) test at the heat-up platform of the hot functional test...

2026-08-15

CNNC Innovation Multi-functional Surface Modification Device Shipped and Delivered

On August 14, 2026, the multi-functional surface modification device developed by CNNC Innovation (Chengdu) Technology Co., Ltd. (hereinafter referred to as "CNNC Innovation") was officially shipped and delivered. This multi-functional surface modification device utilizes CNNC Innovation's proprietary high-energy metal ion source, gas ion source, and supporting single-stage pulsed magnetron source power supply and DC-superimposed pulsed bias power supply. It can perform ion implantation surface modification, metal surface alloying, non-metal surface metallization, auxiliary heating, and other process operations. It can simultaneously achieve gas ion source cleaning and auxiliary deposition treatment. Through the DC-superimposed pulsed bias power supply, directional plasma functionality can be realized, which accelerates deposition efficiency while effectively suppressing abnormal arc discharge and improving film quality.

2026-08-15

Concrete Placement of the 16.5m Slab in the Reactor Building of Unit 4 at Zhangzhou Nuclear Power Plant Successfully Completed

At 21:58 on August 13, the concrete placement of the 16.5m slab in the internal structure of the reactor building of Unit 4 at Zhangzhou Nuclear Power Plant was successfully completed, with safety and quality under control throughout the process, laying a solid foundation for subsequent key path milestones such as crane availability and inner dome lifting. As the core load-bearing structure within the reactor building, the 16.5m slab of the internal structure serves as the critical support platform for the introduction, positioning, and installation of subsequent large-scale core equipment. The engineering structure features key challenges including large construction volume, staggered elevation differences, modular structural rebar installation, and high-precision installation of owner-supplied items, imposing extremely high requirements on overall construction organization, safety, and quality control. The total concrete volume placed this time was 2,297 cubic meters, with a continuous placement duration of 30.5 hours.

2026-08-15

CGN Research Institute Launches "Hehui" I&C Production Line Construction to Advance Domestic Autonomy of High-End Nuclear Power Equipment

Recently, CGN Research Institute held the kickoff meeting for the Hehui I&C production line construction project in Shenzhen, marking new progress in infrastructure and capacity building for the Hehui brand. The project will serve the domestic autonomy of high-end nuclear power equipment, provide support for ensuring the construction progress of nuclear power projects and meeting the safe operation needs of operating units, and help enhance the resilience and competitiveness of China's nuclear power industry chain. The meeting clarified the overall project planning, construction objectives, key milestones, and responsibilities of all parties, established the project management system, and deployed near-term key tasks. The meeting required all parties involved in the construction to increase resource investment, strengthen safety and quality management, strictly enforce technical review, uphold integrity standards, and ensure the production line is commissioned on schedule with high quality...

2026-08-15

Module 5 of Containment Steel Liner Successfully Lifted at Unit 3 of Guangdong Taipingling Nuclear Power Plant

On August 10, the construction of Unit 3 at CGN's Guangdong Taipingling Nuclear Power Plant reached a critical milestone. A Zoomlion 2,000-tonne crawler crane, serving as the core lifting main force, successfully completed the precise positioning of Module 5 of the containment steel liner. This lifting operation involved significant technical challenges and demanding working conditions. The steel liner Module 5 weighed nearly 280 tonnes, with a component diameter of 45 meters, a height of nearly 6 meters, and a wall thickness of only 6 millimeters, making it a typical ultra-large thin-walled flexible component. The module's lateral windward area exceeded 300 square meters, making it susceptible to wind-induced sway during lifting, which imposed extremely high requirements on the crane's operational stability, control precision, and heavy-load adaptability. The Zo...

2026-08-14

Liaoning Zhuanghe Nuclear Power Phase I Project Approved, Zhuanghe Goes All Out to Accelerate Project Implementation

Recently, the State Council held an executive meeting and decided to approve the Liaoning Zhuanghe Nuclear Power Phase I Project. Located in Lizifang Town, Zhuanghe City, Liaoning Province, the Liaoning Zhuanghe Nuclear Power Project is the first nuclear power project in Northeast China to adopt China's self-developed third-generation nuclear power technology, the Hualong One, injecting core momentum into the high-quality development of regional clean energy. The overall plan for the Liaoning Zhuanghe Nuclear Power Project includes the construction of six million-kilowatt-class Hualong One third-generation pressurized water reactor nuclear power units, with unified planning and construction in three phases. The Phase I project approved this time will build two new nuclear power units with a total installed capacity of 2.5 million kilowatts. Upon completion and commissioning, the project will deliver outstanding comprehensive benefits and strong driving effects. In terms of clean energy supply security, each...

2026-08-14

Dong Baotong, Director of the National Nuclear Safety Administration: China's nuclear safety level remains among the top internationally, and during the "15th Five-Year Plan" period, the number of operating nuclear power units in China will rank first in the world

The State Council Information Office held a series of press conferences on August 13 themed "Starting the '15th Five-Year Plan' with a Strong Beginning," introducing the progress of comprehensively advancing the construction of a Beautiful China. Dong Baotong, Vice Minister of Ecology and Environment and Director of the National Nuclear Safety Administration, stated at the conference that ecological environment safety encompasses several key aspects, including ecological security, nuclear safety, and environmental risk prevention and control. The Ministry of Ecology and Environment serves as the lead coordinating body for both the national ecological security work coordination mechanism and the nuclear safety work coordination mechanism. Over the years, together with relevant departments, we have actively responded to various risks and challenges, effectively safeguarding the bottom line of ecological environment safety. Among these, in the area of nuclear safety, we have consolidated the primary responsibility of nuclear facility operators...

2026-08-13

Polar Crane of Unit 1 of Shidao Bay Nuclear Power Expansion Phase I Project Officially Available

On August 12, the load test of the polar crane for Unit 1 of the Expansion Phase I Project was successfully completed, with all performance indicators fully meeting design requirements, marking that the polar crane is officially ready for use and creating favorable conditions for subsequent key tasks such as the introduction and positioning of main equipment in the nuclear island. The polar crane is the core lifting equipment in the reactor building, undertaking critical lifting and handling tasks throughout the entire lifecycle, including heavy equipment hoisting during the construction phase, refueling during shutdown and equipment maintenance during the operation phase, and equipment dismantling during the decommissioning phase. Its operational stability and reliability are directly related to the safety and quality of nuclear island installation. The success of this load test fully verified that all performance indicators of the equipment completely meet the standards for safe and reliable use...

2026-08-13

Completion of World's First Domestic CAP1000 50Hz Canned Motor Reactor Coolant Pump for Guangdong Lianjiang Nuclear Power Phase I

Recently, the world's first domestically manufactured CAP1000 50Hz canned motor reactor coolant pump for the Guangdong Lianjiang Nuclear Power Phase I project was successfully completed and ready for shipment. The completion of this equipment marks significant new progress in the independent development and localization of China's Generation III nuclear power core equipment. Harbin Electric Group provided the canned motor for this reactor coolant pump. The Guangdong Lianjiang Nuclear Power Phase I project plans to construct two domestically developed CAP1000 Generation III passive pressurized water reactor units, each with a single-unit capacity of 1.25 million kilowatts. The project is based on the independent CAP1000 Generation III passive nuclear power technology, adopts a seawater secondary circulation cooling scheme, promotes the coordinated development of nuclear power development and coastal ecological protection, and serves the green and low-carbon development needs of the Guangdong-Hong Kong-Macao Greater Bay Area. This...

2026-08-13

First Fuel Loading Officially Begins at Tianwan Nuclear Power Plant Unit 7

On August 12, as the first fuel assembly was precisely and safely loaded into its designated position in the reactor core, the first fuel loading officially began at Unit 7 of the Tianwan Nuclear Power Plant, which is invested and controlled by China National Nuclear Corporation (CNNC)'s China Nuclear Power. This marks a solid foundation for subsequent reactor criticality and commercial operation. First fuel loading is the core procedure of implanting the "energy heart" into a nuclear reactor. As a key milestone in the full lifecycle of nuclear power construction, it not only serves as a comprehensive test of the unit's years of engineering construction quality, system commissioning level, and safety management capability, but also represents the critical starting point for the unit's nuclear-powered operation. It is understood that this fuel loading is the first-ever loading for a VVER-1200 unit in China, requiring a total of 163 nuclear fuel assemblies to be loaded...

2026-08-12