China's First Enterprise-Level Synchrotron Radiation Technology Application Research Platform Inaugurated in Shanghai

The Sinopec Shanghai Synchrotron Radiation Facility Energy and Chemical Science Laboratory, invested by Sinopec and jointly built with the Shanghai Advanced Research Institute of the Chinese Academy of Sciences, and based on the Shanghai Synchrotron Radiation Facility (SSRF) major scientific infrastructure, was recently inaugurated in Shanghai Zhangjiang Science City. This laboratory is the first enterprise-level synchrotron radiation technology application research platform in China. According to reports, the laboratory consists of three beamline stations and auxiliary laboratories, and will provide technical support and services for basic scientific research conducted by Sinopec and public users, with a focus on oil and gas exploration and development, petroleum refining and chemical engineering, and new energy and new materials. Once the platform is completed, it will help enhance the enterprise's capabilities in forward-looking and fundamental research, and provide scientific research support for cultivating new quality productive forces in China's energy and chemical industry.

2026-08-29

Russia and Egypt Plan to Jointly Establish Additive Manufacturing Center in Egypt

According to the fuel division of Rosatom, it has signed a joint statement of intent with the Egyptian Nuclear Power Plant Construction Supervision and Execution Authority (EA-SNPP), with both sides planning to cooperate in establishing an additive manufacturing center in Egypt. The statement said that Mahmoud Esmat, Minister of Electricity and Renewable Energy of the Arab Republic of Egypt, visited the Moscow Additive Manufacturing Center under the fuel division of Rosatom during his visit to Russia. Following the visit, the Russian fuel division and the Egyptian Nuclear Power Plant Project Supervision and Execution Authority signed the aforementioned statement, clarifying their cooperation in building an additive manufacturing center in Egypt. The cooperation revolves around additive manufacturing...

2026-08-28

3D Systems Collaborates with Savannah River National Laboratory to Advance 3D Printing in Nuclear Energy Systems

3D Systems Corporation of the United States announced on August 27 that it has signed a Cooperative Research and Development Agreement (CRADA) with Savannah River National Laboratory (SRNL), under which the two parties will conduct joint research and development on additive manufacturing technology to advance its application in advanced energy production, nuclear energy systems, energy infrastructure resilience, and related mission scenarios. Under the agreement, the two parties will leverage SRNL's Advanced Manufacturing Collaborative (AMC) to advance work in advanced materials development, equipment upgrades, AI and machine learning-assisted process optimization, manufacturing systems, cybersecurity, and workforce development. Collaboration goals include developing next-generation additive manufacturing materials, real-time process optimization tools, and scalable production solutions...

2026-08-28

CNNC Fuyuan (Beijing) Technology Co., Ltd. officially established, focusing on accelerator and radiation technology equipment

On August 26, 2026, CNNC Fuyuan (Beijing) Technology Co., Ltd. (abbreviated as: CNNC Fuyuan) was officially established. CNNC Fuyuan is a joint venture between China Isotope & Radiation Corporation (CIRC) and CNNC Atomic Energy Institute Technology Co., Ltd., with nuclear technology equipment as its core business and radiation technology empowering industrial upgrading. Leveraging the Atomic Energy Institute's profound accumulation in accelerator technology over more than 70 years, as well as CIRC's market-oriented industrialization capabilities, the company builds a deeply integrated industry closed loop encompassing research, education, application, and utilization, strengthening and complementing the nuclear technology equipment industry chain. Looking ahead, CNNC Fuyuan will adhere to the dual-drive approach of independent innovation and achievement transformation, starting with accelerators, breaking through the boundaries of single products, and extending toward full-spectrum radiation technology,...

2026-08-28

Tescan Launches MIRA XR Ultra-High-Resolution Scanning Electron Microscope for Materials Characterization and Failure Analysis Applications

Tescan recently launched the MIRA XR ultra-high-resolution scanning electron microscope system, targeting materials characterization needs in fields such as battery technology, metallurgy, and advanced materials science. Positioned between the Tescan MIRA and Tescan CLARA, the system aims to deliver higher resolution, enhanced surface sensitivity, and a more streamlined workflow, serving applications including R&D laboratories, industrial quality control, and failure analysis. According to reports, the MIRA XR employs BrightBeam™ technology and a single high-efficiency axial detector to improve surface signal acquisition under field-free imaging conditions, making it suitable for beam-sensitive materials and magnetic samples while reducing the need for sample preparation steps such as surface coating. The system also features an aperture-free column design that minimizes manual aperture selection and adjustment steps, allowing operators to focus more on sample observation and data analysis.

2026-08-26

IsoEnergy Signs Agreement with Kineepik Métis Local to Advance Uranium Exploration in Saskatchewan, Canada

On August 24, 2026, IsoEnergy Ltd. announced that it has signed an exploration agreement with Kineepik Métis Local Inc. to support its responsible uranium exploration activities in Saskatchewan, Canada. Under the agreement, the two parties will establish mechanisms for ongoing communication, information sharing, and collaboration around IsoEnergy's exploration activities in the relevant region. The agreement also provides that Kineepik community members and local businesses may participate in exploration-related work through business partnerships, employment opportunities, and training programs. Kineepik Métis Local Inc. represents Métis rights holders residing within the Kineepik use and occupancy area, including...

2026-08-26

U.S. Develops Hybrid Process Combining Electroforming and 3D Printing for Critical Component Manufacturing in Advanced Nuclear Reactors

On August 24, local time, the U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) announced that its scientists are collaborating with AJ Tuck Company (AJ Tuck) to develop a hybrid manufacturing process that combines 3D printing and electroforming to produce complex, leak-tight hot isostatic pressing canisters for powder metallurgy hot isostatic pressing processes. The process targets the manufacturing of critical metal components for advanced nuclear reactors and other energy and defense applications, with the goal of shortening production workflows and reducing reliance on traditional large-scale forging and casting supply chains. A hot isostatic pressing canister is a type of sealed container used to compact metal powders into high-performance metal components under high temperature and high pressure. Traditional hot...

2026-08-26

Ur-Energy Ships First Uranium from Shirley Basin Mine to Lost Creek Processing Plant

U.S. uranium producer Ur-Energy announced that on August 19, 2026, its Shirley Basin uranium mine in Wyoming shipped its first uranium to the Lost Creek processing plant in the same state. This marks the company's second in-situ recovery (ISR) uranium mine entering full production and beginning its ramp-up phase. Ur-Energy President and CEO Matt Gili stated that the shipment of first uranium signifies the full commissioning of the Shirley Basin project and represents the company's transition into a multi-asset U.S.-based uranium producer. According to him, the Shirley Basin project took approximately two and a half years from planning and construction to production. The Shirley Basin uranium mine is Ur-Energy's second in-situ uranium...

2026-08-21

Berkeley Lab Leads Development of Portable Active-Source Muon Imager

The U.S. Department of Energy's Lawrence Berkeley National Laboratory and Ideon Technologies have received funding from the DOE's Advanced Research Projects Agency-Energy (ARPA-E) to jointly develop a field-deployable active-source muon imaging technology through the Reliable Ore Characterization Using Cornerstone Sensing Technologies (ROCKS) program. The three-year project aims to enhance the detection and characterization of underground critical mineral resources. Image credit: Lawrence Berkeley National Laboratory. Muons are subatomic particles with strong penetrating capability. Previously, Ideon Technologies has used passive muons produced by cosmic rays in the atmosphere for ore body imaging in the mining sector, mapping mineral deposits and analyzing subsurface structures. However, passive muons primarily arrive from above, limiting detection angles; additionally, the natural flux is low—approximately one per square centimeter per minute—and imaging often requires days, weeks, or even months.

2026-08-20

Rosatom masters 3D printing technology for copper and copper alloys

The additive manufacturing technology business division of Rosatom's Fuel Division recently announced that its experts have successfully manufactured products from copper and copper alloys using the RusMelt industrial 3D printer, marking progress in additive manufacturing with copper materials. According to reports, Rosatom had previously used selective laser melting (SLM) technology to produce metal 3D-printed equipment of various sizes, with commonly used materials including stainless steel, heat-resistant materials, and titanium. Due to copper's physical properties such as high thermal conductivity and high electrical conductivity, which also pose technical challenges for laser melting, its application in metal 3D printing has long been limited. The company's additive manufacturing technology center in Moscow...

2026-08-19

2026 Systematic Training Course on Radiation Safety Management Capability for the Irradiation Industry Successfully Held in Lanzhou

To thoroughly implement the Ecological Environment Code and continuously improve the standardized radiation safety management level of the irradiation industry, the 2026 Systematic Training Course on Radiation Safety Management Capability for the Irradiation Industry, hosted by the Nuclear and Radiation Safety Center of the Ministry of Ecology and Environment (hereinafter referred to as "the Center"), was successfully held in Lanzhou, Gansu Province, from August 11 to 13. More than 80 trainees from over 60 irradiation operation, design and manufacturing, and regulatory departments across the country gathered together to study laws, regulations, and standards and share safety experience. This training closely focused on the new regulatory situation of the irradiation industry and industrial development needs, emphasizing both professionalism and practicality. The courses systematically covered the development status and trends of industrial irradiation facilities,...

2026-08-18

Terra Clean Energy Receives Exploration Permit for Marysvale Uranium Project in Utah, USA

Terra Clean Energy Corp. recently announced that it has received the relevant permit from the Utah Division of Oil, Gas and Mining under the Utah Department of Natural Resources to carry out planned exploration work at its wholly-owned Marysvale Uranium Project. Under the approved work plan, the company will construct 5 drill pads to support subsequent diamond core drilling, and excavate 7 exploration trenches to expose and evaluate known uranium-bearing outcrops. Terra stated that this permit represents a significant milestone in advancing this historic uranium project. The trenching work will help the company's technical team map mineralized structures, collect samples, and validate existing geological interpretations. The results will...

2026-08-18

Korea's COSMAX Partners with Pohang Accelerator Laboratory to Use Synchrotron Radiation Accelerator for Cosmetics R&D

COSMAX, a global cosmetics ODM company, announced on the 18th that it has signed a memorandum of understanding with the Pohang Accelerator Laboratory (PAL) in Korea to conduct cosmetics R&D using advanced scientific and technological infrastructure such as the synchrotron radiation accelerator. At the MOU signing ceremony held at the Pohang Accelerator Laboratory, COSMAX Group Chairman Lee Kyung-soo (left) poses with PAL Director Kim Jae-young. / Photo provided by COSMAX. According to reports, the Pohang Synchrotron Radiation Accelerator (PLS-II) operated by the Pohang Accelerator Laboratory generates light more than 10 billion times brighter than sunlight, enabling atomic-scale analysis of nanoscale material structures. Currently, the facility has been used for microstructural research across multiple industrial fields, including new drugs, semiconductors, and new materials.

2026-08-18

World's first laser plasma accelerator-driven high-resolution muon imaging experiment to launch in Romania

Ideon Technologies, a global subsurface detection muon tomography company, is participating in an international research consortium to conduct the world's first high-resolution muon imaging experiment driven entirely by a laser plasma accelerator. The experiment aims to use a compact accelerator to produce muon beams on demand for non-destructive high-resolution imaging, with applications targeting mineral production, critical infrastructure, cargo inspection, medical imaging, semiconductors, nuclear security, and space radiation testing. Consortium members include the University of Texas at Austin, the Extreme Light Infrastructure - Nuclear Physics (ELI-NP) facility team, Heinrich Heine University Düsseldorf, Helmholtz-Zentrum Dresden-Rossendorf, ELI-Beamlines, and Tau Systems.

2026-08-18

Russia to Conduct Comparative Measurements in Radiation Monitoring and Individual Dose Monitoring

In September, NIIEFA (D.V. Efremov Scientific Research Institute of Electrophysical Apparatus), a subsidiary of Rosatom, will jointly conduct comparative measurements in the fields of radiation monitoring (RM) and individual dose monitoring (IDM) with Ritverts JSC and the A.M. Nikiforov All-Russian Center for Emergency and Radiation Medicine. The work will be carried out under the supervision and support of experts from the D.I. Mendeleev All-Russian Research Institute for Metrology. The focus of these comparative measurements is to verify the accuracy, reliability, and consistency of measurement results obtained by different radiation safety monitoring methods and equipment. Through unified comparison, the performance of various instruments in workplace radiation level assessment, surface contamination monitoring, and individual exposure dose recording can be further confirmed, thereby enhancing the credibility of final radiation dose assessments.

2026-08-15

Philippine Steel Plant in Davao Raided: Radioactive Isotopes Detected in Finished Rebar and Multiple Materials at the Facility

On August 14, Philippine authorities conducted a raid on Davao Mighty Steel Corp., a steel manufacturing plant located in Barangay Ilang, Bunawan District, Davao City. The operation followed an investigation launched by the National Bureau of Investigation (NBI) after receiving reports that the company was involved in the production and sale of substandard steel rebar, with the scope of the investigation subsequently expanding after radioactive isotopes were detected in commercially sold DMS rebar. The operation was led by the National Bureau of Investigation, with the participation of the Presidential Anti-Organized Crime Commission (PAOCC), and was supported by the Philippine Nuclear Research Institute (PNRI), the Philippine Air Force, the Philippine Coast Guard's Chemical, Biological, Radiological and Nuclear emergency response units, the Coast Guard Special Operations Group, and the Army's 10th Infantry Division.

2026-08-15

Canada's Rook 1 Uranium Mine Breaks Ground, Could Contribute One-Fifth of Global Uranium Production

The Rook 1 uranium mine project in northern Saskatchewan, Canada, has officially commenced construction. The project, advanced by NexGen Energy, is located south of the Athabasca Basin, approximately 130 kilometers north of La Loche. Saskatchewan Premier Scott Moe, former Canadian Prime Minister Stephen Harper, Secretary of State for Rural Development Buckley Belanger, and local Indigenous representatives attended the groundbreaking ceremony. The total project investment is approximately CAD 2.2 billion, with an expected construction period of four years. External infrastructure work has already begun, shaft sinking is planned for 2027, and the on-site runway will be expanded to 1,780 meters. Rook 1 is regarded as one of the world's largest uranium mine projects. NexGen estimates...

2026-08-14

CGN Dasheng Launches BV Cable X-Ray Thickness Gauge for Full Online Inspection of Cable Insulation Layers

CGN Dasheng Accelerator Technology Co., Ltd. recently announced that its BV cable X-ray thickness gauge can be used for online inspection of insulation layers during cable production. The system employs X-ray technology to perform real-time measurement of key parameters such as cable outer diameter, inner diameter, wall thickness, eccentricity, and concentricity, replacing the potential detection blind spots inherent in traditional sampling inspection methods. In cable production, insulation layer thickness directly affects product safety and material utilization. Traditional inspection typically relies on sample cutting, manual measurement, and recording, with limited inspection frequency. If issues such as uneven wall thickness or eccentricity occur during production, they are often difficult to detect in a timely manner, which also hinders subsequent quality traceability and process adjustment. According to the company, the equipment...

2026-08-14

China Isotope & Radiation's National Headquarters for Irradiation Application Industry Settles in Guangzhou

On August 11, the national headquarters of China Isotope & Radiation's irradiation application industry — CNNC Irradiation (Guangdong) Technology Co., Ltd. (hereinafter referred to as "CNNC Irradiation") — officially settled in Tianhe District, Guangzhou, and entered the Pearl River New City. This marks an important milestone in the development of China Isotope & Radiation's irradiation application industry. The relocation of the national headquarters for irradiation application to Guangzhou is a key step for China Isotope & Radiation in implementing the central-local cooperation deployment between CNNC and Guangdong Province, and in strategically positioning for the "15th Five-Year Plan." As the nuclear technology application industry platform of CNNC, China Isotope & Radiation possesses a complete industrial chain and core technological advantages in the irradiation application field. It is a leading domestic provider of irradiation facility design, manufacturing, installation, and operation & maintenance services, and has accumulated extensive industrialization experience in high-end medical device sterilization, green irradiation processing of food and traditional Chinese medicinal materials, and material modification.

2026-08-14

Construction Advances at Denison's Phoenix Uranium Project in Canada

Denison Mines Corp. of Canada recently filed its quarterly and semi-annual financial documents for the period ending June 30, 2026, and disclosed the latest progress on its Phoenix uranium project construction, uranium sales, and exploration activities. According to the company's disclosure, site preparation work has continued to advance since on-site construction commenced at the Phoenix project in March 2026. To date, more than 20% of the site civil works have been completed, with roadbed civil works for the process plant and wellfield areas nearing full completion. Construction management facilities and temporary camp facilities have also been installed and put into operation. With the temporary camp now in service, accommodation capacity at the Wheeler River project site has increased to nearly 400 people, providing conditions for a larger construction workforce in the coming phases. Denison stated...

2026-08-13

Urenco in Almelo, Netherlands accelerates expansion, ninth centrifuge hall enters planning

Urenco in Almelo, the Netherlands, is continuing its large-scale expansion. Before a new large facility has even been completed, the company has already begun advancing its next expansion project, with a ninth production hall housing thousands of centrifuges now in the preparatory stage. This signals a clear acceleration in the pace of the company's uranium enrichment capacity expansion. Urenco's core business is supplying fuel for nuclear power plants, namely enriching uranium through centrifuges. In recent years, tight global energy supply, fluctuating natural gas prices, and heightened energy security concerns have brought nuclear energy back into focus for many countries. As demand for nuclear power rises, the importance of the nuclear fuel supply chain has also grown, and Urenco...

2026-08-12