Search Results

Startorus Fusion Completes 20 K Cryogenic Rapid Discharge Test of Central Solenoid Model Magnet (CSMC) for Spherical Tokamak Device

Startorus Fusion (HTS) recently announced that its independently developed central solenoid (CS) model magnet for a spherical tokamak device (tokamak) successfully completed a 6350 A cryogenic current-carrying and rapid discharge test under harsh cryogenic conditions. Test results showed that the magnet achieved a maximum magnetic field of 10 T and a magnetic field change rate of up to 63 T/s, setting a new record for the magnetic field change rate of known fusion superconducting magnets. This test was conducted at 20 K (-253 °C). The magnet not only successfully reached a maximum magnetic field strength of 10 T, with a central magnetic field of 7.6 T, but also smoothly completed the rapid discharge test required for tokamak ohmic discharge. As a...

2026-10-09

The first concrete pouring for the nuclear island of Unit 2 of State Power Investment Corporation (SPIC) Guangxi Bailong Nuclear Power Project was successfully completed.

The first concrete pouring for the nuclear island of Unit 2 of SPIC Guangxi Bailong Nuclear Power Project was completed at 16:07 on September 30, after 69 hours and 40 minutes of continuous work. A total of 6,732.5 cubic meters of concrete was used for this pouring, marking another important milestone for the project after the FCD achievement for the nuclear island of Unit 1. Phase I of the Bailong Nuclear Power Project plans to build two CAP1000 nuclear power units. These two units adopt independently designed and domestically manufactured Generation III passive nuclear power technology, with each unit having a capacity of up to 1.25 million kilowatts. At present, Unit 1 has entered the construction and installation stage, and the steel containment vessel bottom head, CA20, CV1R, CA01...

2026-09-30

All Four ITER Test Blanket Module (TBM) Conceptual Designs Pass Preliminary Design Review

Recently, the ITER Organization officially completed the Preliminary Design Review (PDR) of four Test Blanket Module (TBM) conceptual designs. The four blanket system technical designs led by China, the EU, Japan, and Korea — core ITER member parties — all passed independent review to high standards, marking that "tritium breeding and energy extraction validation," one of ITER's three major engineering goals, has fully entered the final engineering implementation phase, providing critical engineering pathway support for the next-generation fusion demonstration reactor (DEMO) to achieve commercial tritium self-sufficiency. In the blueprint for magnetic confinement fusion power generation, deuterium-tritium (D-T) fusion reactions...

2026-09-30

State Nuclear Electric Power Planning Design & Research Institute Co., Ltd. convened the first Party Committee (enlarged) meeting of 2026 and the second meeting of the 2026 Safety Production and Emergency Management Committee

On September 28, State Nuclear Electric Power Planning Design & Research Institute Co., Ltd. convened the first Party Committee (enlarged) meeting of 2026 and the second meeting of the 2026 Safety Production and Emergency Management Committee. Guided by Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era, the meeting thoroughly studied and implemented Xi Jinping Thought on Ecological Civilization and General Secretary Xi Jinping's important instructions and directives on safety production, fully implemented the relevant work requirements of the Group Company's Safety Production Deployment Enhancement and Third Quarter Safety Risk Control Meeting, comprehensively reviewed the work of the first three quarters, scientifically assessed the current safety development situation, and arranged and deployed key tasks for safety production and ecological environmental protection in the next stage. Wang Chengli, Secretary of the Company's Party Committee, Chairman, and Director of the Safety Committee...

2026-09-30

China Nuclear Engineering & Construction Group Co., Ltd. Holds the Fourth Safety Production and Quality Committee (Expanded) Meeting of 2026

On September 28, Yin Weiping, Secretary of the Party Committee and Chairman of the Company, and Director of the Safety Production and Quality Committee, presided over the fourth Safety Production and Quality Committee (Expanded) Meeting of 2026. The meeting heard the report on the Company's safety, environmental protection, and quality work in the third quarter, and in response to the current safety and quality management situation and risks, deployed and arranged key fourth-quarter safety and quality breakthrough tasks. The meeting pointed out that the Company currently faces a severe and complex situation in safety and quality, with heavy production and operation tasks in the fourth quarter compounded by seasonal construction risks. All cadres and employees must raise their political stance, maintain clear awareness, continue to firmly build the ideological defense line for safety and quality, and deeply understand the extreme importance and urgency of doing a good job in safety and quality work...

2026-09-30

Innovating the Safety Review Pathway to Strengthen the Safety Foundation of High-Temperature Gas-Cooled Reactors — National Nuclear Safety Administration Approves Safety Design Criteria for High-Temperature Gas-Cooled Reactors

Recently, the National Nuclear Safety Administration approved the Safety Design Criteria for the High-Temperature Gas-Cooled Reactor of the Jiangsu Xuwei Nuclear Heating and Power Plant (hereinafter referred to as the Safety Design Criteria). This document further refines the specific safety requirements for high-temperature gas-cooled reactors, provides a foundational basis for the safety design of high-temperature gas-cooled reactors, and serves as an important basis for subsequent safety review. This is China's first approved safety design criteria for small nuclear power reactors (hereinafter referred to as small nuclear power reactors), marking that the safety review of small nuclear power reactors has explored a new pathway led by safety design criteria. I. Relevant Background: The Rapid Development of Small Nuclear Power Reactors Calls for Innovation in Review Methods. In recent years, global advanced nuclear energy technologies have been accelerating their evolution...

2026-09-30

National Standard "Test Methods for Plasma Parameters (GB/T 48094—2026)" Led by the University of Science and Technology of China Officially Released, Solidifying the Standardization Foundation for Controlled Nuclear Fusion and High-Tech Industries

Recently, led by the University of Science and Technology of China (USTC), in collaboration with research institutions including the Aerospace Information Research Institute of the Chinese Academy of Sciences, the Hefei Institutes of Physical Science of the Chinese Academy of Sciences, the Southwestern Institute of Physics (SWIP), and the Beijing Institute of Environmental Characteristics, universities including Yunnan University, Nanchang University, China Jiliang University, and Chizhou University, as well as key industry-chain enterprises including Anhui USTC Yuke Technology Co., Ltd., Anhui Zhongke Fusion Terahertz Technology Co., Ltd., and Fermion Technology (Shanghai) Co., Ltd., jointly drafted, and the national standard "Test Methods for Plasma Parameters" (Standard No.: GB/T 48094—2026), under the centralized management of the National Technical Committee 487 on Optoelectronic Measurement of Standardization Administration of China (SAC/TC487), was officially approved for release and will be formally implemented from March 2027. This standard establishes unified specifications for test methods of key plasma physical parameters, fills the gap in national-level technical standard basis, and marks a milestone breakthrough for China in the standardization of advanced plasma diagnostic technology.

2026-09-28

Unit 2 of State Power Investment Corporation (SPIC) Guangxi Bailong Nuclear Power Project starts construction

At 18:27 on September 27, the nuclear island of Unit 2 of State Power Investment Corporation (SPIC) Guangxi Nuclear Power Bailong Nuclear Power Project began its first concrete pour (FCD), marking that Phase I of the Bailong Nuclear Power Project has shifted from single-unit construction to a new stage of comprehensive dual-unit construction. The FCD for Unit 2 of the Bailong Nuclear Power Project adopted a single-side pushing continuous one-time integral pouring method, with approximately 6,637 cubic meters of concrete planned to be poured over approximately 58 hours. In view of the multiple overlapping construction difficulties such as the large bottom slab size, irregular shape, and high difficulty of temperature control and curing, the project team prepared a special construction plan in advance and implemented all-round safeguard measures. The single-side pushing pouring path and process parameters were optimized, and the owner, supervisor and general contractor exercised full-process on-site supervision and control

2026-09-28

International Seminar of Veteran Nuclear Decommissioning Experts Held in Bishkek, Kyrgyzstan: Focusing on Central Asian Nuclear Energy Prospects and Cooperation on Kyrgyzstan's SMR Project

On September 24, 2026, with the joint support of Rosatom and the Council of Energy Veterans of the Kyrgyz Republic (Совет ветеранов энергетики Киргизской Республики), the International Seminar on the Prospects for the Development of Nuclear Energy and Nuclear Technologies in the Kyrgyz Republic, organized by the International Union of Veteran Experts in Nuclear Energy and Industry (МСВАЭП), was held in Bishkek, the capital of Kyrgyzstan. Senior experts in the nuclear and electric power industries from Kyrgyzstan, Russia, Kazakhstan, Tajikistan, Uzbekistan and other Central Asian countries...

2026-09-27

Turkey's National Nuclear Energy Agency (TUNAS) and the U.S. Trade and Development Agency (USTDA) Launch New Nuclear Energy Cooperation

Turkey and the United States will cooperate on a technical study aimed at assessing the potential application of U.S. small modular reactors (SMRs) and Generation IV nuclear technologies. This project, funded by the U.S. Trade and Development Agency (USTDA), is being implemented by Turkey's state-owned nuclear energy company (Turkiye Nuclear Energy, or TUNAS) in cooperation with the United States. During the United Nations General Assembly in New York, TUNAS and USTDA reached an agreement on the project. The study will evaluate SMR designs from four U.S. companies and five Generation IV reactor technologies from multiple perspectives, including technical, economic, legislative, and licensing aspects, to determine their potential application in Turkey...

2026-09-23

ACRA Rating Agency Confirms Rosatom's ESG Rating at ESG-2 (AA+) Level

On September 18, 2026, according to the latest assessment results, ACRA Rating Agency confirmed that the ESG rating of Rosatom State Atomic Energy Corporation (Rosatom) remains at the ESG-2 (AA+) level, which represents the company's exceptionally high evaluation in the areas of environmental protection, social responsibility, and corporate governance. This also marks the fourth consecutive year that the agency has confirmed this exceptionally high rating for Rosatom. At the same time, the rating agency assigned a stable outlook to the group, meaning that its ESG rating is highly likely to remain stable over the next 12 to 18 months. To carry out the data collection work for this ESG rating, six core divisions under Rosatom actively participated, including the mining division, the power division, ...

2026-09-20

China Calls for Advancing SMR Innovation and Strengthening Global Nuclear Energy Cooperation

During the 70th General Conference of the International Atomic Energy Agency, China on the 14th hosted a side event themed "Pooling Efforts for SMR Innovation, Building a Nuclear-Beautiful Home Together," focusing on strengthening international cooperation on small modular reactors (SMRs) worldwide, promoting technological innovation, standards coordination, capacity building and related deployment and application, and providing support for global climate governance and sustainable development. At the side event themed "Pooling Efforts for SMR Innovation, Building a Nuclear-Beautiful Home Together," Shan Zhongde, Director of the China Atomic Energy Authority, said that China regards nuclear energy as an important option for building a new energy system and achieving the carbon peak and carbon neutrality goals, and, relying on a complete nuclear industry innovation chain, industrial chain and talent chain, has become one of the pioneers and pathbreakers in SMR development and deployment...

2026-09-18

Idaho National Laboratory (INL) Foundation and MicroNuclear Collaborate to Advance Molten Salt Nuclear Battery Technology

The Idaho National Laboratory (INL) Foundation and MicroNuclear, LLC today announced a collaboration agreement to jointly advance the development of MicroNuclear's Molten Salt Nuclear Battery© (MsNB). The MsNB is a compact molten salt microreactor concept designed to provide stable power and process heat. This collaboration will support the next phase of MsNB development, including detailed engineering design, safety and licensing approval, prototype manufacturing, first fission testing, and the development of a reusable model for future deployment and commercialization. The agreement brings together complementary expertise in engineering, reactor technology, manufacturing, quality assurance, training, operations, and commercialization...

2026-09-18

Focusing on Nuclear Safety Assessment and Future Strategic Priorities, the OECD Nuclear Energy Agency's Working Group on Accident Analysis and Management (WGAMA) Holds Its 29th Annual Meeting

The Working Group on Accident Analysis and Management (WGAMA), a subsidiary body of the Committee on the Safety of Nuclear Installations (CSNI) of the OECD Nuclear Energy Agency (OECD/NEA), held its 29th Annual Meeting from September 7 to 9, 2026, at the OECD Conference Centre in Paris, France. Sixty-one delegates from 21 countries, as well as the International Atomic Energy Agency (IAEA) and the European Commission (EC), attended the meeting. Participants included experts from regulatory bodies, technical support organizations, research institutions, industry, and international organizations, who jointly assessed current activities, approved new projects, and discussed future strategic priorities in the field of accident analysis and management. As an international platform advancing the technical basis for nuclear reactor safety assessment, WGAMA at this meeting...

2026-09-17

Korea Radioactive Waste Agency Hosts Nuclear Nuclide Analysis Industry and Technology Nexus Symposium (RANEX 2026)

The agency and the Korea Radioactive Analysis Association jointly hosted the Nuclide Analysis Industry and Technology Nexus Symposium (RANEX 2026) from September 15 to 16 at the Lahan Select Hotel in Gyeongju, attracting more than 200 experts, scholars, and industry representatives from home and abroad. The core purpose of this symposium was to share the importance of nuclide analysis—a key area in the national radioactive waste management undertaking—and to jointly explore strategies for technological innovation and the cultivation of an industrial ecosystem through in-depth cooperation between the public sector and private enterprises. During the symposium, experts discussed the development strategy for the radioactive waste nuclide analysis industrial ecosystem, the latest analytical technologies and instrumentation...

2026-09-17