Search Results

The first concrete pouring for the nuclear island of Unit 2 of State Power Investment Corporation (SPIC) Guangxi Bailong Nuclear Power Project was successfully completed.

The first concrete pouring for the nuclear island of Unit 2 of SPIC Guangxi Bailong Nuclear Power Project was completed at 16:07 on September 30, after 69 hours and 40 minutes of continuous work. A total of 6,732.5 cubic meters of concrete was used for this pouring, marking another important milestone for the project after the FCD achievement for the nuclear island of Unit 1. Phase I of the Bailong Nuclear Power Project plans to build two CAP1000 nuclear power units. These two units adopt independently designed and domestically manufactured Generation III passive nuclear power technology, with each unit having a capacity of up to 1.25 million kilowatts. At present, Unit 1 has entered the construction and installation stage, and the steel containment vessel bottom head, CA20, CV1R, CA01...

2026-09-30

Pressurizer of Lufeng Nuclear Power Unit 1 Successfully Hoisted into Place

On September 30, the pressurizer of Lufeng Nuclear Power Unit 1, constructed by China Nuclear Industry 23 Construction Co., Ltd., was successfully hoisted into place. The success of this hoisting marks major progress in the installation of the primary circuit main equipment in the nuclear island of Lufeng Nuclear Power Unit 1, laying a solid foundation for the subsequent surge line welding, system equipment installation, and commissioning work. The pressurizer is a core main equipment of the nuclear island reactor coolant system and a Class 1 nuclear safety equipment. It undertakes the tasks of pressure regulation and overpressure protection for the primary circuit system and is key equipment for ensuring the safe and stable operation of the reactor. This equipment is a vertical cylindrical pressure vessel with a body height of more than ten meters and a total hoisting weight of over one hundred tons. It is installed in the pressurizer compartment of the CA01 module, with stringent design and manufacturing standards...

2026-09-30

Main Coolant Piping Welding of Lufeng Nuclear Power Unit 6 Successfully Completed

On September 28, the main coolant piping welding of the nuclear island of Lufeng Nuclear Power Unit 6 was successfully completed. All non-destructive testing of the main coolant piping was finished, with the first-pass qualification rate of radiographic testing (RT)/ultrasonic testing (UT) reaching 100%, laying a solid foundation for subsequent key milestones such as nuclear loop flushing and cold functional testing. Facing the high standards of main coolant piping welding, the project department strictly implemented nuclear safety supervision and control requirements, carried out precondition verification across all dimensions of personnel, machines, materials, methods, and environment, established a main coolant piping welding control zone, strictly controlled the working environment including temperature, humidity, and cleanliness, and ensured stable and controllable welding conditions. The project team fully drew on the main coolant piping welding experience of Unit 5, formulated a special plan and implemented full-process management, and through digital monitoring means throughout the entire welding process, tracked key parameters such as welding deformation and temperature in real time, refined the process disclosure, in-process inspection, and quality acceptance procedures for each weld joint, and applied the work style of "strict, cautious, meticulous, and pragmatic" to every welding operation and every weld seam, ensuring the successful completion of the main coolant piping welding of Unit 6.

2026-09-30

Taiwan's Nuclear Safety Commission Completes Compliance Review of Maanshan Nuclear Power Plant "Restart Plan"

On September 24, 2026, the Nuclear Safety Commission of the Taiwan region of China officially completed and approved the review of the restart plan for the Maanshan Nuclear Power Plant (the Third Nuclear Power Plant). The Nuclear Safety Commission (referred to as the NSC), Taiwan's nuclear safety regulatory body, officially announced the completion and approval of the review of the restart plan submitted by Taiwan Power Company (Taipower) for the Maanshan Nuclear Power Plant (the Third Nuclear Power Plant). This move marks a key step for the Maanshan Nuclear Power Plant units in the contest between decommissioning and shutdown versus evaluation for life extension. However, the NSC emphasized that this approval only represents recognition of the plan's content at the current stage. For the units to actually restart, they must still pass multiple stringent engineering self-inspections, on-site reviews, and statutory approval procedures. The NSC...

2026-09-30

Netherlands to Acquire 70% Stake in Borssele Nuclear Power Plant

The Dutch government has reached an agreement to acquire a 70% stake in EPZ, the operator of the Borssele NPP. These shares will be purchased from the Province of Zeeland and its subordinate municipalities. The acquisition aims to ensure the long-term continued operation of the existing nuclear power plant. It is understood that the Borssele Nuclear Power Station (Dutch: Kerncentrale Borssele) is the only commercial nuclear power plant still in operation in the Netherlands. It is located near the town of Borssele in the province of Zeeland in the southwestern Netherlands and is operated by the Dutch utility EPZ. The Borssele Nuclear Power Plant has a net electrical output of 485 megawatts (MWe), uses pressurized water reactor (PWR) technology...

2026-09-30

Bechtel and Westinghouse Consortium Formally Signs EPC Turnkey Contract for Poland's First Nuclear Power Plant, Construction Scheduled to Begin in 2027

A consortium comprising U.S. engineering giant Bechtel and nuclear technology supplier Westinghouse Electric Company has formally signed an Engineering, Procurement, and Construction (EPC) contract with Poland's state-owned nuclear power company Polskie Elektrownie Jądrowe (PEJ) to advance the construction of Poland's first-ever commercial nuclear power plant. The nuclear project is located in Choczewo on the Baltic Sea coast in the Pomerania province of northern Poland. PEJ officially stated that the site is planned to host 3 Westinghouse AP1000 Generation III+ advanced pressurized water reactor units, with a designed total installed capacity of 3750 megawatts (3750 MWe), and the first unit is expected...

2026-09-30

State Nuclear Electric Power Planning Design & Research Institute Co., Ltd. convened the first Party Committee (enlarged) meeting of 2026 and the second meeting of the 2026 Safety Production and Emergency Management Committee

On September 28, State Nuclear Electric Power Planning Design & Research Institute Co., Ltd. convened the first Party Committee (enlarged) meeting of 2026 and the second meeting of the 2026 Safety Production and Emergency Management Committee. Guided by Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era, the meeting thoroughly studied and implemented Xi Jinping Thought on Ecological Civilization and General Secretary Xi Jinping's important instructions and directives on safety production, fully implemented the relevant work requirements of the Group Company's Safety Production Deployment Enhancement and Third Quarter Safety Risk Control Meeting, comprehensively reviewed the work of the first three quarters, scientifically assessed the current safety development situation, and arranged and deployed key tasks for safety production and ecological environmental protection in the next stage. Wang Chengli, Secretary of the Company's Party Committee, Chairman, and Director of the Safety Committee...

2026-09-30

Guangxi Nuclear Power Holds the 2026 Third-Quarter Nuclear Safety Culture Promotion Studio Joint Exchange Activity

To cultivate a solid foundation for nuclear safety culture and promote the exchange and sharing of technical experience among regulatory authorities, owners, and all participating construction parties, the 2026 third-quarter Nuclear Safety Culture Promotion Studio joint exchange activity for the South China Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment (hereinafter referred to as the "South China Supervision Station"), the Bailong Nuclear Power Project, and the Fangchenggang Nuclear Power Project was recently held at Guangxi Nuclear Power. The activity was chaired by Zheng Tao, head of the on-site supervision group for the Bailong Nuclear Power Project of the South China Supervision Station. Chen Rongda, director of the Third Nuclear Facility Supervision Division of the South China Supervision Station, Li Qiang, general manager of Guangxi Nuclear Power, and Hou Yousheng, general manager of Fangchenggang Nuclear Power, attended the activity, along with representatives from all participating construction units. All parties gathered together to focus on the cultivation and implementation of nuclear safety culture...

2026-09-30

Argonne National Laboratory Achieves Latest Research Progress in Advanced Reactor Passive Safety, Revealing Flow Characteristics of Reactor Cavity Cooling System Using NSTF Facility

A research team at Argonne National Laboratory, under the U.S. Department of Energy (DOE), has achieved the latest research progress on passive shutdown decay heat removal mechanisms for next-generation advanced nuclear reactors. Under unplanned reactor shutdown or sudden emergency accident conditions, nuclear fuel continues to release decay heat. Ensuring continuous and reliable heat removal under complete power loss and without manual intervention is a core issue in the inherent safety design of Generation IV advanced reactors. The Argonne research team recently focused on the transient thermal-hydraulic response characteristics of key passive heat removal systems under realistic dynamic decay heat curves. This...

2026-09-30

Innovating the Safety Review Pathway to Strengthen the Safety Foundation of High-Temperature Gas-Cooled Reactors — National Nuclear Safety Administration Approves Safety Design Criteria for High-Temperature Gas-Cooled Reactors

Recently, the National Nuclear Safety Administration approved the Safety Design Criteria for the High-Temperature Gas-Cooled Reactor of the Jiangsu Xuwei Nuclear Heating and Power Plant (hereinafter referred to as the Safety Design Criteria). This document further refines the specific safety requirements for high-temperature gas-cooled reactors, provides a foundational basis for the safety design of high-temperature gas-cooled reactors, and serves as an important basis for subsequent safety review. This is China's first approved safety design criteria for small nuclear power reactors (hereinafter referred to as small nuclear power reactors), marking that the safety review of small nuclear power reactors has explored a new pathway led by safety design criteria. I. Relevant Background: The Rapid Development of Small Nuclear Power Reactors Calls for Innovation in Review Methods. In recent years, global advanced nuclear energy technologies have been accelerating their evolution...

2026-09-30

Saskatchewan, Canada Releases Long-Term Nuclear Energy Strategy: Plans to Build 2,600 MW of Nuclear Power by 2050

Scott Moe, Premier of Saskatchewan, Canada, officially announced the province's long-term nuclear energy development plan in Saskatoon on September 29, establishing a strategic goal of building at least 2,600 megawatts (MW) of nuclear power capacity by 2050. Moe emphasized that nuclear energy is not only a zero-carbon clean baseload power source, but also a "nation-building opportunity" that empowers economic growth for generations, will create high-end jobs across the province, attract multinational capital, and ensure long-term electricity stability for households and industry. According to the plan, four core pillars have been established: 1. Build a highly resilient power foundation supporting long-term economic growth: Rely on non-intermittent zero-carbon nuclear energy to address the electricity load gap brought about by society-wide electrification...

2026-09-30

Russia is conducting high-level technical consultations with Iran on the construction of brand-new nuclear power plants

According to a comprehensive report by Azerbaijan News Network (AzerNews) and several mainstream Iranian media outlets, Alexey Likhachev, Director General of Rosatom, recently disclosed to the media in Yerevan, Armenia that Russia is conducting high-level technical consultations with Iran on the construction of brand-new nuclear power plants, with the cooperation planning scope covering both large commercial reactor types and small modular reactors (SMRs). At the same time, Rosatom's engineering team is conducting comprehensive geological and engineering assessments of multiple candidate new sites in Iran that have the conditions for nuclear power grid connection. Likhachev specifically pointed out that the strategic binding between Moscow and Tehran in the field of civilian nuclear energy...

2026-09-30

Construction of BOP Sub-item Installation Works for Units 1 and 2 of Zhejiang Jinqimen Nuclear Power Plant Officially Commences

On September 29, the BOP sub-item installation works (Lot 1 and Lot 2) for Units 1 and 2 of Zhejiang Jinqimen Nuclear Power Plant, contracted by Beijing Zhongyan Dadi Technology Co., Ltd. (hereinafter referred to as Zhongyan Dadi), officially commenced, marking the full launch of the project construction. Jinqimen Nuclear Power Plant is located in Xiangshan County, Ningbo City, Zhejiang Province. It is a benchmark clean energy project under national key planning. Once fully completed, its annual power generation capacity will reach 55 billion kWh, which is of great strategic significance to the optimization of the energy structure and green low-carbon transformation in the Yangtze River Delta region. The BOP (nuclear power plant supporting facilities) sub-item is an important foundation for ensuring the safe and stable operation of nuclear power units, and its construction precision and quality control standards are far...

2026-09-30

Standard Technical Specifications for Passive Nuclear Power Plants, Chiefly Compiled Under the Leadership of Shanghai Nuclear Engineering Research and Design Institute, Officially Released

Recently, the National Nuclear Safety Administration officially released the Standard Technical Specifications for Passive Nuclear Power Plants and its explanatory document, chiefly compiled under the leadership of Shanghai Nuclear Engineering Research and Design Institute, aiming to promote the standardization and normalization of technical specifications for passive nuclear power plants, continuously improve the nuclear safety supervision and management system, and further enhance the operational safety level of China's nuclear power plants. Based on the framework and format, screening criteria, and other foundations for technical specifications established by the Special Working Group on Technical Specification Optimization of the National Nuclear Safety Administration, Shanghai Nuclear Engineering Research and Design Institute, targeting the passive design characteristics of AP and CAP series nuclear power plants and fully incorporating the operating experience and safety regulatory practices of China's passive nuclear power plants, completed the compilation of China's first standard technical specifications and explanatory document for passive nuclear power plants...

2026-09-30

Qinshan Nuclear Power Plant Unit 2 of Qinshan Phase II Completes 218 Refueling Outage

At 18:30 on September 29, Unit 2 of Qinshan Phase II was successfully connected to the grid, marking the official completion of the 218 refueling outage. During this outage, more than 5,300 tasks were completed, mainly including the PSR weakness modification for prevention of boron misdilution, addition of automatic primary coolant makeup and residual heat removal eddy current detection functions, excitation system modification for the B-train emergency diesel generator, disassembly and inspection of the turbine-generator, annual inspection of the main transformer and station service transformer, replacement of No. 2 and No. 3 seals of the No. 2 main coolant pump, disassembly and inspection of the No. 1 charging pump, modification of the nuclear island switchboards, condenser cleaning and eddy current inspection, and optimization of the pipe supports where the safety injection system safety valves are located. These important tasks have laid a solid foundation for the safe and stable operation of the unit in the next fuel cycle. All outage personnel, under the...

2026-09-29