Search Results

World Nuclear Industry Status Report: The Global "Nuclear Renaissance" Is in Fact "Single-Engine Driven by China," with Regions Outside China in "Substantial Stagnation"

Recently, the latest edition of the World Nuclear Industry Status Report (WNISR), led by independent energy analyst Mycle Schneider, pointed out in its analysis: the so-called global nuclear renaissance is in essence a localized expansion driven by a single engine—China; if China's strong engineering momentum is stripped away, nuclear power in the rest of the world is in a state of structural substantial stagnation and slight contraction. The report notes: as the global nuclear industry remains mired in delays and cost overruns, a wave of retirements of aging units, and the paper-only commercialization of small reactors, China has become the unquestionable absolute driving force of the global nuclear power industry...

2026-10-07

Pressurizer of Lufeng Nuclear Power Unit 1 Successfully Hoisted into Place

On September 30, the pressurizer of Lufeng Nuclear Power Unit 1, constructed by China Nuclear Industry 23 Construction Co., Ltd., was successfully hoisted into place. The success of this hoisting marks major progress in the installation of the primary circuit main equipment in the nuclear island of Lufeng Nuclear Power Unit 1, laying a solid foundation for the subsequent surge line welding, system equipment installation, and commissioning work. The pressurizer is a core main equipment of the nuclear island reactor coolant system and a Class 1 nuclear safety equipment. It undertakes the tasks of pressure regulation and overpressure protection for the primary circuit system and is key equipment for ensuring the safe and stable operation of the reactor. This equipment is a vertical cylindrical pressure vessel with a body height of more than ten meters and a total hoisting weight of over one hundred tons. It is installed in the pressurizer compartment of the CA01 module, with stringent design and manufacturing standards...

2026-09-30

Saskatchewan, Canada Releases Long-Term Nuclear Energy Strategy: Plans to Build 2,600 MW of Nuclear Power by 2050

Scott Moe, Premier of Saskatchewan, Canada, officially announced the province's long-term nuclear energy development plan in Saskatoon on September 29, establishing a strategic goal of building at least 2,600 megawatts (MW) of nuclear power capacity by 2050. Moe emphasized that nuclear energy is not only a zero-carbon clean baseload power source, but also a "nation-building opportunity" that empowers economic growth for generations, will create high-end jobs across the province, attract multinational capital, and ensure long-term electricity stability for households and industry. According to the plan, four core pillars have been established: 1. Build a highly resilient power foundation supporting long-term economic growth: Rely on non-intermittent zero-carbon nuclear energy to address the electricity load gap brought about by society-wide electrification...

2026-09-30

Construction of BOP Sub-item Installation Works for Units 1 and 2 of Zhejiang Jinqimen Nuclear Power Plant Officially Commences

On September 29, the BOP sub-item installation works (Lot 1 and Lot 2) for Units 1 and 2 of Zhejiang Jinqimen Nuclear Power Plant, contracted by Beijing Zhongyan Dadi Technology Co., Ltd. (hereinafter referred to as Zhongyan Dadi), officially commenced, marking the full launch of the project construction. Jinqimen Nuclear Power Plant is located in Xiangshan County, Ningbo City, Zhejiang Province. It is a benchmark clean energy project under national key planning. Once fully completed, its annual power generation capacity will reach 55 billion kWh, which is of great strategic significance to the optimization of the energy structure and green low-carbon transformation in the Yangtze River Delta region. The BOP (nuclear power plant supporting facilities) sub-item is an important foundation for ensuring the safe and stable operation of nuclear power units, and its construction precision and quality control standards are far...

2026-09-30

Canada Promotes Uranium Resources and Nuclear Industry to the UK

Recently, Scott Moe, Premier of the Canadian province of Saskatchewan, led a trade and investment delegation to the United Kingdom, focusing on promoting the province's abundant uranium resources and its expertise and experience in the nuclear energy sector. The visit aimed to demonstrate to the UK side that Saskatchewan possesses the resource reserves, research and development infrastructure, and complete industrial chain conditions to advance nuclear energy development, and to create opportunities for local enterprises to expand into overseas markets. Scott Moe stated in an official statement that the province has abundant uranium resources, well-established nuclear energy research infrastructure, and mature supply chain capabilities, and is fully equipped to become a world leader in nuclear energy development....

2026-09-14

UK Nuclear Industry Association and Ukrainian Nuclear Forum Sign Nuclear Energy Cooperation Memorandum

On September 10, 2026, the UK Nuclear Industry Association (NIA) and the Ukrainian Nuclear Forum signed a memorandum of understanding to expand cooperation in areas including decommissioning of complex nuclear facilities, deployment of small modular reactors, and securing "trusted partner" status under the EU's Industrial Accelerator Act (IAA). Nuclear energy is an important source of Ukraine's wartime electricity supply, accounting for approximately 55% of the country's electricity supply. This cooperation builds on existing UK-Ukraine nuclear fuel cooperation. Urenco, one-third owned by the UK government, has supplied Ukraine with...

2026-09-12

Sichuan Energy Nuclear Industry Co., Ltd. Established in Chengdu, Focusing on Advanced Nuclear Microreactor R&D

On September 9, according to Chengdu Sci-Tech Innovation Investment Group, Sichuan Energy Nuclear Industry Co., Ltd. recently completed its establishment in Chengdu with a registered capital of 1 billion yuan. The company was jointly funded and established by Chengdu Sci-Tech Innovation Investment Group through its Chengdu Future Industry Venture Capital Fund, together with Sichuan Energy Development Group, China Nuclear Power Research and Design Institute, Shenzhen Capital Group, and other state-owned capital entities, with its registered address in Chengdu. According to disclosed information, Sichuan Energy Nuclear Industry Co., Ltd. will mainly focus on advanced nuclear microreactor technology R&D iteration, industrialization implementation, and green energy technology layout, positioned as a resource integration center, R&D innovation center, and investment decision-making center, with priority on advancing advanced multi-purpose...

2026-09-10

Ukrainian Nuclear Energy Association and Energoatom Trade Union Expand Nuclear Energy Cooperation

On September 2, the Ukrainian Nuclear Energy Association (UkrYat) and the Primary Trade Union Organization of NNEGC Energoatom (PPO NNEGC Energoatom) signed an interaction and cooperation agreement, under which the parties will expand cooperation in nuclear industry development, employee rights protection, personnel training, and scientific and technological capacity building. The agreement was signed by Volodymyr Kholosha, President of the Ukrainian Nuclear Energy Association, and Serhiy Snitkov, Chairman of the Primary Trade Union Organization of NNEGC Energoatom. Under the agreement, the parties will jointly promote the development of Ukraine's nuclear industry, safeguard the labor rights and socio-economic interests of industry professionals...

2026-09-07

Radionuclide Ward Officially Launched at Xuguan Campus of Suzhou Nuclear Industry General Hospital under CNNC Medical

On September 3, the radionuclide ward of the Nuclear Medicine Department at the Xuguan Campus of Suzhou Nuclear Industry General Hospital, affiliated with CNNC Medical, was officially inaugurated and put into operation. The ward addresses the standardized radionuclide therapy needs of patients with tumors, thyroid diseases, and endocrine disorders, providing inpatient treatment services with isolation and protection conditions. According to reports, the newly launched radionuclide ward is equipped with radiation protection facilities and intelligent monitoring systems, enabling fully enclosed ward management, treatment process monitoring, and multi-level protection. Following the ward's commissioning, the Nuclear Medicine Department will expand from its previous examination-focused service model into a closed-loop service chain integrating radionuclide diagnosis, drug therapy, isolated hospitalization, and research follow-up, enhancing its capacity to manage complex and critically ill patients...

2026-09-05

Korea Hosts ROK-U.S. Nuclear Industry Cooperation Seminar in the United States

The Korea Nuclear Energy Export Industry Association (KNA) announced on August 30 that it held the ROK-U.S. Nuclear Industry Cooperation Seminar in Dallas, Texas, on August 27. The seminar was held in conjunction with NECX 2026, a major nuclear energy event in North America, with the primary purpose of consolidating the foundation for ROK-U.S. nuclear industry cooperation and creating networking opportunities for Korean companies to enter the U.S. market and participate in related nuclear projects. Approximately 70 representatives from the nuclear industry sectors of both countries attended the meeting. Participants included a Korean delegation comprising Korea Electric Power Corporation (KEPCO) and Korea Hydro & Nuclear Power (KHNP), representatives of Korean small and medium-sized enterprises, and officials from relevant U.S. state government agencies...

2026-08-31

Iran Says Nuclear Fusion to Become Priority in Nuclear Industry Development

At a national Government Week celebration ceremony held in Tehran, Mohammad Eslami stated that developing nuclear fusion is a priority direction for the future of Iran's nuclear industry. Iran needs to rely on its domestic capabilities, knowledge-based enterprises, and universities to drive progress in related fields. Eslami said that the innovation network of the Atomic Energy Organization of Iran (AEOI) is providing support for nuclear fusion activities, shifting related work from the technology demonstration stage further toward system development and capacity building. He also stated that the establishment of the Non-Destructive Testing (NDT) training center is an initiative to enhance industrial quality, promote technological advancement, and cultivate domestic professional expertise...

2026-08-27

Beijing Nuclear Industry Hospital and Aviation General Hospital Hold Nursing Academic Exchange Focusing on Nuclear Medicine Specialty Nursing and Continuous Home-Based Care

On August 21, Beijing Nuclear Industry Hospital, in collaboration with Aviation General Hospital, held a nursing academic exchange meeting. Nursing management teams, nursing backbone staff and related professionals from both hospitals attended the meeting, engaging in exchanges on humanistic nursing development, the "Internet+" continuous home-based care service model, and nuclear medicine specialty nursing, exploring practical pathways for high-quality development of nursing services. Jin Congjun, Vice President of Beijing Nuclear Industry Hospital, introduced the hospital's development overview in his speech and welcomed the visiting nursing expert team from Aviation General Hospital. He expressed his hope to leverage this exchange as an opportunity to establish a regular learning platform, promote mutual learning and complementarity between the two sides, and jointly enhance nursing service capabilities. Aviation General...

2026-08-25

Russia Marks 81 Years Since the Birth of Its Nuclear Industry: From the Soviet Nuclear Program to Modern Nuclear Talent Development

On August 20, 1945, the founding documents establishing the Special Committee and the First Main Directorate under the Council of People's Commissars of the USSR were officially signed, generally regarded as the starting point of the Soviet nuclear industry system. Eighty-one years later, Russia's nuclear energy community once again looks back at this historical milestone, linking it to nuclear science and technology development and talent cultivation. In August of that year, after the United States used atomic bombs on Hiroshima and Nagasaki, the Soviet Union accelerated the establishment of its own nuclear research and industrial system. On August 29, 1949, the Soviet Union completed the RDS-1 nuclear test. Thereafter, Soviet nuclear science gradually extended from military applications to peaceful uses, building the world's first grid-connected nuclear power plant and developing a fleet of nuclear-powered icebreakers. The establishment of the nuclear industry system also drove...

2026-08-21

IAEA Lise Meitner Programme Concludes First Visit to Russia

The first visit to Russia under the International Atomic Energy Agency (IAEA) Lise Meitner Programme recently concluded in Moscow. The two-week visit brought together 14 female nuclear industry professionals from 14 countries, focusing on Russia's nuclear technology, nuclear facilities, and research platform operations, along with training and exchanges on professional competence and leadership. During the visit, the delegation toured the Kalinin Nuclear Power Plant, the Rosatom Technical Academy in Obninsk, the Joint Institute for Nuclear Research (JINR), and the Machine-Building Plant under Rosatom's fuel division. Participants also learned virtually about...

2026-08-19

Rosatom masters 3D printing technology for copper and copper alloys

The additive manufacturing technology business division of Rosatom's Fuel Division recently announced that its experts have successfully manufactured products from copper and copper alloys using the RusMelt industrial 3D printer, marking progress in additive manufacturing with copper materials. According to reports, Rosatom had previously used selective laser melting (SLM) technology to produce metal 3D-printed equipment of various sizes, with commonly used materials including stainless steel, heat-resistant materials, and titanium. Due to copper's physical properties such as high thermal conductivity and high electrical conductivity, which also pose technical challenges for laser melting, its application in metal 3D printing has long been limited. The company's additive manufacturing technology center in Moscow...

2026-08-19